Acudor RHG3844 30" x 36" Ladder Access Roof Hatch - Galvanized
Acudor RHG APPLICATION: Acudor Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building.
Acudor RHG PRODUCT FEATURES: Weather tight construction • Convenient one-hand operation • 12" high insulated curb • Supports 40lbs./sq. ft. live load.
Acudor RHG OPTIONAL FEATURES: Stainless Steel cover, curb, and/or hardware • Polycarbonate domes for daylighting • Louvered Curbs, Curb Mounted Units • Curb pitch corrected for sloped roof • Higher curb heights for "green roof" applications.
Acudor RHG SPECIFICATIONS: Cover: Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 22 gauge galvanized steel inside liner. Curb: 14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes. Hinge: Heavy duty galvanized steel pintle hinges with 3/8" pin. Opening: Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover. Door Latch: Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions. Finish: Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel paint.
Acudor RHG3844 30" x 36" Ladder Access Roof Hatch - Galvanized Specification Submittal: Click Here.
Acudor RHG3844 30" x 36" Ladder Access Roof Hatch - Galvanized Product Page: Click Here.
We Also Recommend