Zurn Z1201-N-XB EZCarry® High Performance Horizontal Adjustable Siphon Jet No-hub Bariatric Water Closet Carrier – 1,000 lb.

Zurn Z1201-N-XB EZCarry® High Performance Horizontal Adjustable Siphon Jet No-hub Bariatric Water Closet Carrier – 1,000 lb.

Product Overview:

Zurn's EZCarry High Performance Water Closet Carrier System offers customers a revolutionary design that out-performs traditional water closet carriers. The EZCarry system has advanced features and benefits that allow the engineer to specify with confidence, gives the contractor a quick and easy install, and proven performance for building owners with standard or low-flow systems. Zurn offers industry-leading line carry across the largest breadth of water closet carriers on the market.

Product Options:

• Z1201-NL4-XB 4" [102mm] No-Hub Left Hand Inlet with Flow to Right*
• Z1201-NR4-XB 4" [102mm] No-Hub Right Hand Inlet with Flow to Left*
• * When Sitting on the Toilet

Features & Benefits:

• Propel waste up to three times farther, reducing the possibility of low-flow system clog for overall plumbing system protection
• 1/2" rear anchor tie-down and rigid support frame assembly provide loading capabilities up to 1,000 lb. for safe support in bariatric installations
• Safely specify extra heavy-duty applications with confidence using tested system
• Reduce maintenance emergencies with carriers designed to optimize waste line carry.
• Maintain a sanitary environment with wall-mounted fixture
• Test the system and cut the coupling to length from the front with Zurn's patent-pending EZ-SET™ coupling option

Engineering Specification:

ZURN Z1201-N_4-XB EZCarry® Bariatric horizontal siphon jet water closet carrier system, with high performance Dura-Coated cast iron main fitting with hydro-mechanically optimized sweep, 4” [102 mm] no-hub connections, and extended 2” [51 mm] vent. Corrosion resistant, adjustable 3” [76mm] X 6” [102mm] cast iron coupling, designed to increase flow velocity and line carry, and labor saving “Neo-Seal” bonded gasket optimizes flow performance while reducing installation steps. Complete system includes an adjustable, gasketed faceplate; floor mounted foot supports; rigid support frame assembly; extra-heavy-duty ½” [13 mm] rear anchor tie down; fixture bolts, trim, and stud protectors. EZCarry® XB system complies with all applicable requirements of ASME A112.6.1M up to a 1000 lbs [454 kg] maximum static load.

Product Notes:

1. Cut ZZ Coupling, Min. ‘P’ Dim.Obtainable = 3 [76]
2. Feet bolted to floor using 1/2 [13] dia.anchors.
3. Rear anchor assembly required for secure installation.
4. Floor anchors must each be able to withstand a pull-out force of 748 lbs [339 kg].
5. Pull-out forces are calculated values with standard coupling assembly. No safety factor has been applied. See Form # C38 for more information.

Technical Downloads:

• Zurn Z1201-N-XB: Specification Submittal